Up One Level
Server Support Brackets — Catalogue Page 6.2.4





PART NUMBER

RFM-UPS-4PKT-FLM
PART DESCRIPTION

Provides 4 Point Support For Equipment Sold In Pairs


Blank Filler Plates [Composite Material] — Catalogue Page 6.2.2





PART NUMBER

RFM-BPTL-19-1U
RFM-BPTL-19-2U



PART DESCRIPTION

19" EIA Mount — 1U Height
19" EIA Mount — 2U Height


Composite material, tool-less installation.

Supplied in contractor packs: qty 10


Blank Filler Plates [Steel] — Catalogue Page 6.2.2





PART NUMBER

RFM-BP19-1U
RFM-BP19-2U
RFM-BP19-4U
RFM-BP19-9U 

PART DESCRIPTION

19" EIA Mount 1U Height, Steel
19" EIA Mount 2U Height, Steel
19" EIA Mount 4U Height, Steel
19" EIA Mount — 9U Height, Steel

Note: 23" Mount available for Steel filler plates, on request

Grounding Bars [Vertical & Horizontal] — Catalogue Page 1.5.8





PART NUMBER

RFM-HGB-19


PART DESCRIPTION

Horiz. mount copper bar 1"w x 3/16"Thick. 19" EIA Mount

Grounding Kit — Catalogue Page 6.1.3





PART NUMBER

RFM-GRD-KIT

PART DESCRIPTION

Kit c/w 2 Assemblies and accommodates 2 doors.

Each assembly consists of:

• 2 x 10 Awg Wire
• 16” Cable Length (0.406 M) (Each Cable)
• 2 x 1/4” Crimped Lug Connectors (1 Eye Hole)
• 2 x #10-32 Keps Nuts
• 1 x m/f 250 Disconnect


Jumper Kit — Catalogue Page 6.1.3





PART NUMBER

RFM-JK-60

PART DESCRIPTION

Kit assembly consists of:

• 6 Awg Wire
• 60” Cable Length (1.54 M)
• includes (1x) 1/4-20 Keps Nut
• includes (1x) #10-32 Keps Nut
• Crimped One End: 1/4” Lug Connector
   (45 Degree Angle, 2 Eye Holes)

4" Fan Air Filter — Catalogue page 6.2.7





PART NUMBER

RFM-FAN-FILTERS

PART DESCRIPTION

Assembly consists of:
• Durable Composite Material
• Easy to Install - Attaches Directly to 4" Fan*
• Snap on 'Top' for Convenient Filter Maintenance or Cleaning

*note: 4" Fan must be ordered as a separate item (see Thermal Management)

Caster Sets [For Cabinets]


PART NUMBER

RFM-3C-B-30
RFM-3C-B-24

PART DESCRIPTION

Caster Sets For 30" Width RFM Series Colocation Cabinets
Caster Sets For 24" Width RFM Series Colocation Cabinets

RFM Series Colocation Cabinets Caster Sets Incl.:
• 4 x Swivel-Type Non-Locking Caster, 3" Diameter
• 2 x Cabinet Caster Pads
• Hardware Kit

notes:
3" caster sets are rated for up to 750 LBS static load
3" caster sets for RFM Series Cabinets add an additional 7/8" height




Cagenut, Tapped, And Ganging Hardware Packages


PART NUMBER

RFM-CN
RFM-CN100
RFM-CN10-32
RFM-CN10-32100

RFM-10-32

RFM-GK

PART DESCRIPTION

Qty 24 x 1/4-20 Cage Nuts and 3/4" Screws
Qty 96 x 1/4-20 Cage Nuts and 3/4" Screws
Qty 24 x #10-32 Cage Nuts and 1/2" Screws
Qty 96 x #10-32 Cage Nuts and 1/2" Screws

Qty 100 x #10-32 x 1/2" Screws

Ganging Kit includes:
• Qty 4 x 5/16-18 x 1" Hex Head Bolt
• Qty 4 x 5/16-18 Keps Nut
• Qty 4 x 5/16" Flat Washer


note: it is recommended that only same type cabinets be ganged together


Gasket Kits


PART NUMBER

RFM-GASKET-KIT

PART DESCRIPTION

Gasket Kit used for:
• Sealing Doors, Side Panels, and Top Covers
• Help Prevent Dust From Entering The Cabinet


Right Hand Hinge Set

Right Hand Cabinet Hinge

PART NUMBER

RFM-RH-HINGE

PART DESCRIPTION

Right Hand Hinge Set for RFM Series Cabinets


Left Hand Hinge Set

Left Hand Cabinet Hinge

PART NUMBER

RFM-LH-HINGE

PART DESCRIPTION

Left Hand Hinge Set for RFM Series Cabinets